Structural specifications: Product model: HT03RA100 Itinerary : 360° Table size: F100mm Transmission mode: worm gear (reduction ratio 1/180) Guide rail: bearing Material: Aluminum-black anodized Weight: 1.7kg Resolution / Pulse: 0.01 ° (no subdivision) 0.0005° (20 subdivisions) Design resolution: 0.01°, non-MS drive; 0.0005° = 1.8", 20MS drive Rotation speed (maximum): 25° / sec Repeatability: 0.005° = 18" Absolute on-axis accuracy: 0.01° = 36" Top board beat: 15µm Recoil: 0.005° = 18" Eccentricity: 10µm Lost movement: 0.005° = 18 Parallelization: 80µm Load: 45kg Packing size: 231316cm Gross weight: 2kg Package Included: 1X HT03RA100 rotating platform. Electric Rotary Platform Motorized Precision Rotary Stages Table Diameter 100mm. Laboratory Electric Rotating Machine Optical Motorized Rotation Platform 360°.
The HT03RA100 rotating platform Apply To Industrial production, scientific research, fine-tuning precise positioning, spraying equipment, laser processing, optical device testing, semiconductor equipment, testing instruments, medical equipment. High-precision electric rotating platform, new construction, new technology; key indicators have passed strict inspection.
This series of products are used for laser precision machining, 3D scanning measurement system, etc. Using worm gear, friction resistant material, high precision of rotation precision, outer ring With scale, interface, convenient signal output.Worm gear transmission mode, using special process, high wear resistance, reliable and reliable, high precision shafting makes high rotation precision, large bearing capacity and stable movement. Widely used in industrial automation and scientific experiments, the scale ring is installed on the outer ring of the rotary table to facilitate initial positioning and reading. The electronically controlled rotary table can be used flat, vertically, and inverted. The limit function and zero function can be added. The stage can be used vertically or assembled with other stages. The prototype stepper motor 42 stepping motor (1.8°). The servo motor can be replaced according to requirements. The steel cup has high precision, large carrying capacity and long service life. Standard stepper motor and DB9 interface, choose controller flexibility, so we can provide a fully customized motion system. A timing platform with stepper motor and RS232 interface for easy connection to motion controllers. Fine grinding worm drive, comfortable movement, backwards can be neglected, the motor is connected with the worm through a high-quality elastic coupling, synchronous drive without noise. Dash the outside of the platform to easily read the scale. Transmission mode: worm gear (reduction ratio 1/180).
Resolution / Pulse: 0.01 ° (no subdivision). Design resolution: 0.01°, non-MS drive. 0.0005° = 1.8, 20MS drive. Rotation speed (maximum): 25° / sec. Repeatability: 0.005° = 18.
Absolute on-axis accuracy: 0.01° = 36. Recoil: 0.005° = 18.
Lost movement: 0.005° = 18. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Resolution / Pulse(no subdivision). Worm gear (reduction ratio 1/180). Resolution / Pulse(20 subdivisions). This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Rotary & Linear Motion\XY & Rotary Positioning Stages".
The seller is "chengduktn41" and is located in this country: US. This item can be shipped to United States.